Visonic Security Alarm System Panel (V-PMASTER-30)

Zones & General Features

• Input type: Wireless
• Inbuilt Wireless Zone: 64
• Onboard wired Zone: 1
• Max Expandable Zone: None
• Zone Type : 16
• Wired EOL inputs: Yes
• Anti-Masking Support: Yes
• Two-way wireless inputs: Yes
• Double knocking: Yes
• Zone type customization: Yes
• Wireless Smoke/Heat Detector: Yes
• Onboard programmable O/P: 1
• Maximum expandable outputs: 1
• Two-way wireless keyfobs: Yes
• Two-way wireless sirens: Built-In Siren + (supprts additional wireless Sirens upto 8)
• Wireless keypads: Buit-in Keypad + Supports additional Wireless keypads upto 4
• No. of Area/partitions : 3 + 1 (common)
• Network data encryption: Yes
• Area Programming: Yes
• Timed Arming: Yes
• Auto Arm Areas: Yes
• No of Part Arm/Sub part of area: 3 + 1 (common)
• Hardware Monitoring: Yes
• No of user : 48
• No of user type ( list down theuser type): 1- Master, 1- Installer, 48-User
• One-time code: Yes
• Event Log: 1000

Communications And Modems

• PSTN: Yes, On-board
• GSM : Yes, On-board
• Ethernet Communicator: Yes, On-board
• Supports Cloud & Mobile App: Yes
• Event Signalling to CMS: Yes
• Communication Formats: "SIA, Contact ID, Scancom, SIA IP, Visonic
• PowerNet."
• Programming Software : Yes
• Programming Cable: Over IP through CMS Software

Environmental And Operating Features

• Storage temperature: -20°C to +60°C
• Operating temperature: 14°F to 120°F (-10°C to 49°C)
• Maximum Humidity: 93% relative humidity, @ 30°C (86°F)
• Housing: ABS Plastic

Electrical & Battery

• Power Supply: Output: 12.5 VDC, 1.6A
• Integrated power supply: Internal
• Battery capacity & type: 7.2 V 1300mAH (6 cell Battery)
• Battery Low Voltage Signal: 7.2 V (6-cell battery pack
• Power Output Fault signal: Yes
• Deep Discharge protection: Yes
• Over voltage protection trigger: Yes
• Internal battery charger: Yes
• Operating voltage: "Internal switching power supply:
• Input: 100-240VAC, 0.75A"
• Standby current consumption: "Approx. 260 mA standby, at the beginning
• (power ON) and then goes down to 60 mA,
• 1400 mA max. current drain during alarm. "
• Fuse (AUX 12V): Yes, All Outputs are Protected (Automatic Reset)
• Fuse (mains): Yes

Certifications And Warranty

• Security Grade: Grade 2
• Approvals: UK standards: This product is suitable for use in systems installed to conform to PD6662:2010 at Grade 2 and environmental class 2. DD243 and BS8243. | Applica T&C: The PowerMaster-30 G2- ATS Categories –DP4, Environmental Class II, Security Grade 2 Certified by Applica T&C in accordance with EN 50131-1, EN 50131-3, EN 50131-6, EN 50131-5-3, EN 50130-5, EN 50130-4, EN 50136-1, EN 50136-2 | U.S. Standards: PowerMaster-30 G2 - FCC- CFR 47 part 15 and part 68, UL 1023 and UL 985 | Canada Standards: PowerMaster-10 G2 and PowerMaster-30 G2 - IC- RSS 210, ULC-C1023, ULC-S545-02 / Note: Only devices operating at 912-919 MHz are tested and listed by UL/ULC. | SIA CP01 standards: PowerMaster-10 G2 and PowerMaster-30 G2: for SIA CP01, a siren must be used in the system installation. | GSM standards: Europe: Complies with CE standards: EN 301 511, EN301 489-7 | USA: CFR 47 Part 22 (GSM850) and Part 24 (GSM 1900).
• Support Helpline: Yes